Imprimanta 3D original Prusa MK4 kit (neasamblata)
Livrare in aprox. 50 zile
The MK4 provides high-speed 3D printing with ease and is ever so reliable like all Original Prusa 3D printers. It has all the best features of the popular MK3- an open-source 3D printing workhorse with easy maintenance and advanced safety features- and adds much more!
Cod produs: zPMK4K
Disponibilitate: In Stoc
Pret: 6095 Lei
Prețul include TVA.
Recomandă unui prieten
Original Prusa MK4 is built around our new 32-bit connected architecture and the next-generation extruder (Nextruder). It lays down a perfect first layer every time without Live Adjust Z and it has support for high-speed printing with Input Shaper and Pressure Advance. We also improved the safety features even further. Plus, there are a ton of useful things, such as quick-swap nozzles, built-in support for remote printing and webcams, and many more. And it’s still beautifully quiet.
Main Features:
High-speed printing with ease
Thanks to our own implementation of Input Shaper and Pressure Advance technologies in the MK4’s firmware, the printer can eliminate resonance in prints and predict the flow of the filament. The result is a decrease in print time by up to 70% compared to MK3. What's more, the printer is very quiet even at these speeds - check out the sub-20-minute Benchy video. Support for high-speed printing is just around the corner via a firmware update - read the blog post here.
Perfect First Layer Out of the Box
Thanks to the precise Loadcell sensor, MK4 can lay down a perfectly smooth and consistent first layer automatically without any user input. At the beginning of a print, the printer taps the sheet with the nozzle in a grid-like pattern to measure the distance and then calculates the correct offsets. The result is a perfect first layer on every surface, without manual adjustments.
The Nextruder with Breakout Board
Extruder is the heart of every 3D printer. And this is a special one. On most 3D printers today, replacing extruder components is a rather complicated process. With the new connector break-out board inside the Nextruder, all of the parts, such as fans, heaters, thermistors, etc., are connected directly there. If you need to swap anything, it takes just a minute.
32-bit xBuddy Mainboard
Our new xBuddy board is a 32-bit STM32-powered mainboard with many great features. It has several unique hardware-based safety protection systems, communicates with four thermistors, has all important ports (Ethernet, Wi-Fi, works with USB-A flash drives) and more. The entire board was designed, manufactured, and tested in-house.
Exceptional Print quality
The MK4 comes with redesigned, more robust plastic parts and new precise 0.9° stepper motors (0.9° / step; low inductance) on the X and Y axes that help eliminate Vertical Fine Artifacts on prints. Plus, there are thicker 10mm rods on the Z-axis. The result is, that prints look better than ever and even printing with “problematic” filaments like Flex is a breeze.
Color LCD screen and simple UI
MK4’s display supports G-code thumbnails, QR codes and other elements that make using the printer so much easier. We also redesigned many of the existing menus and added a customizable footer panel. Directly under the LCD, there is an RGB status bar to signalize the current status of the printer. Next to the LCD, there’s a USB-A port for standard USB flash drives.
Quick-Swap Nozzles
Thanks to two quick-release thumbscrews on the side of the body of Nextruder, which holds the nozzle in place, you can swap nozzles easier than ever. The MK4 is using special nozzles with an all-metal filament guide (no PTFE tubes anywhere), which improves the overall reliability of the printer. Simple Nextruder-to-V6 adapter is available.
Slice with PrusaSlicer
Our internally developed multiplatform slicer comes with in-house made and fully tested profiles for all of our 3D printers and a wide range of filaments. With built-in tools, such as organic supports, cutting, automated object distribution, ironing and many others, you will turn your 3D models into print files in no time!
Support for a wide range of Materials
The MK4 is fully compatible with a wide range of various types of materials. No matter whether you want to print something for fun from PLA and flexible materials, or you need to produce durable prototypes from PETG, ASA, Polycarbonate and Polypropylene - the MK4 can handle them without any problem.
Prusa Connect and Connectivity Options
MK4 is, along our other 3D printers, fully supported by Prusa Connect, which allows you to control the printer via internet. You can drag-and-drop G-Codes into the browser window to upload print files first into the cloud (each user gets 2 GB for free) and then transfer it into the printer’s USB storage and start the print remotely. All communication is encrypted.
Applications
Households
What you can print with the MK4? Almost anything! Check out the inspiration and free 3D models for kitchen, living room, home decor and garden on Printables.com.
You can also browse amazing models from designers from all over the world submitted in thematic contests.
Hobbies
Whether you're maker, cosplayer, pop-culture fan, gamer, modeller or board-game player, MK4 can open up new possibilities for you.
On Printables.com, you can share your designs and makes with others or download 3D models for free. Join us!
Manufacturing
Original Prusa 3D printers are used in industries worldwide as efficient, easy-to-use, and reliable 3D printing workhorses.
Our cost-effective solution with simple maintenance is a perfect choice for everyone - from start-ups to the large international companies!
Education
Join the tens of thousands of schools, universities, and other educational institutions worldwide that have adopted 3D printing! Explore the vast possibilities of this essential, state-of-the-art technology.
Read more case studies and examples of usage of the Original Prusa printers in education.
Architecture & Design
A quick and affordable way to create refined models with intricate detail. Free up the time of your skilled designers and let the 3D printers do the hard work.
Check out the videos and articles about leading designers and artists using our 3D printers in their work.
Automotive
Modern-day automotive industry faces many challenges - from disrupted supply chains to rapid technology development and constant changes. 3D printing brings the necessary efficiency and flexibility.
Here are examples of where our 3D printers helped with the production and prototyping in the automotive industry.
Technical Parameters
| Build Volume | 250 x 210 x 220 mm | 9.84 x 8.3 x 8.6 in |
| Filament diameter | 1.75 mm |
| Layer height | 0.05-0.30 mm |
| Mainboard | Custom 32-bit xBuddy electronics with STM32 |
| Stepper Drivers | Trinamic 2130 |
| Stepper motors | Precise 0.9° X,Y stepper motors (prevents VFA) |
| Extruder | Nextruder, Direct Drive, E3D V6 compatible (with adapter) |
| Extruder electronics | Custom breakout board for connecting fans, thermistors and other parts. |
| Filament path | Aluminum heatsink, all-metal hotend, no PTFE tube |
| Drive system | Nextruder Planetary Gear System, 10:1 gearbox ratio |
| Nozzle diameter |
0.4mm (default) / other nozzle diameters supported |
| Max nozzle temperature | 300 °C / 572 °F |
| Max heatbed temperature | 120 °C / 248 °F |
| LCD screen | 3.5″ graphic 65k color screen |
| Connectivity | LAN, Optional ESP Wi-Fi module (delivered with the printer) |
| Print medium | USB drive / LAN / internet via Prusa Connect |
| Advanced sensors | Filament sensor, Loadcell sensor, Power panic, 4 high-precision thermistors (genuine Semitec) + fan motors RPM monitoring |
| Print surface | Magnetic heatbed with removable PEI spring steel sheets |
| Bed calibration | Automatic, Mesh Bed Leveling (only on print area) |
| Supported materials | PLA, PETG, ABS, ASA, Flex, HIPS, PA, PVA, PC, PP, CPE, PVB, NGEN, composites and more |
| Printer dimensions (without spool) | 7 kg, 500×550×400 mm; 19.6×21.6×15.7 in (X×Y×Z) |
| PSU | 240W, custom made by Delta with Power Panic HW |
| Power consumption | PLA settings: 80W / ABS settings: 120W |
* Consumable parts, such as print sheets (smooth, textured, etc.), are not covered by the warranty since their coatings are expected to deteriorate over time, unless the failure is due to a defect in materials or workmanship. Cosmetic damage, which includes, but is not limited to, scratches, dents, cracks, or other aesthetic damage, is also not covered. Only sheets defective upon delivery are covered by the warranty.
Basic package includes:
- Original Prusa MK4 kit 3D printer
- Double-sided Smooth PEI Print Sheet
- 1kg of Prusament PLA Galaxy Black (for all orders placed before 31st May 2023)
- 3D Printing Handbook
- USB drive with sample prints (G-codes)
- Toolset: Uni-wrench, 13-16 wrench, Philips screwdriver, Nose pliers, Allen and torx keys
- Alcohol-saturated wipes, acupuncture needle
- Spoolholder
- Spare parts package
- Prusa lubricant for bearings
- A pack of Haribo gummy bears
- Manufacturing protocol
Add-ons
Ready for multi-color printing with MMU3
MK4 can be enhanced by an optional add-on that allows your single-extruder printer to print with up to 5 colors (materials) at the same time. The MMU3 contains five filament insertion points. Load the five colors of your choice, slice the object with MMU3 profile in PrusaSlicer and start the print. The system automatically selects filament using the selector, loads it into the Nextruder and the MK4 starts printing. When it’s time to change the color or material, it also happens automatically.
The MMU3 is the latest edition of Multi Material printing device by Prusa Research. The firmware has been rewritten completely, we have redesigned the plastic parts, added more robust metal parts, improved the electronics and updated the filament buffer. All of these changes have improved the reliability and user comfort to levels where MMU has never been before.
Enclosure available
MK4 is *fully compatible with the Original Prusa Enclosure. If you want to print more advanced technical materials on your MK4, you’ll find the Enclosure really handy. It stabilizes the printer environment, eliminates drafts and odors, and makes the printer even more silent.
The Enclosure is available with a range of useful add-ons, such as a filtration system, locking mechanism and more - check out the announcement article and the Enclosure section on our e-shop.
*PSU Cable Quick-release for the Original Prusa MK4 coming soon.
Sample Prints
6 reasons to buy the MK4
Great User Support
We offer 24/7 tech support via live chat and email in seven languages. Our printers come with detailed instructions and guides for easy assembly and maintenance. You can also visit our knowledge base, community forum, Facebook groups and official Blog, where we publish useful 3D printing tips and tricks, contests and more!
Fun to Assemble
The MK4 assembly kit is an excellent first step into the world of 3D printing. You will get to know your 3D printer inside out and find out how it works! The assembly is quite easy, requires no soldering, all cables are cut to length and ready to be plugged in. The assembly instructions are easy to follow and all of this makes the kit very friendly to younger builders, too!
Built-in Safety Features
Original Prusa 3D printers are well-known for their reliability and safe operation. Every part of our printers is thoroughly tested in-house. The MK4 is equipped with four thermistors and comes with a custom-built high-quality Delta power supply. The printer can recognize issues with heating and stop operation to prevent damage.
Open-source and Community Friendly
All parts of our printer are open-source, which means we publish all source codes and blueprints online. The community around our products is huge and the feedback is overwhelmingly positive - don't believe us? Check out Facebook groups and YouTube videos! There's so much to do with your 3D printer - buying it is just the beginning!
Quality Guaranteed by Josef Prusa & Prusa Research
Prusa Research is a 3D printing company based in Prague, Czech Republic. It was founded in 2012 by Josef Prusa, one of the core RepRap developers, as a one-man startup and grows to a 700+ team now. We develop our own hardware and software, invent, improve, tinker, experiment and do all sorts of awesome stuff.
Upgradability
One of the most popular features of the Original Prusa concept is upgradability. When you buy our 3D printer, you can upgrade it later to a newer version, so you don't need to buy a whole new model every two years like, for example, your phone or laptop. We also keep supporting our 3D printers with regular firmware updates that bring new features!
Discount program for Original Prusa MK4 kit owners
Our discount program for the Original Prusa MK4 kit printer owners gives you a 5% discount on 30 selected filaments per year. Most importantly including our high-precision filament, the Prusament!
How does it work?
To enter the discount program, you only need to purchase your first Original Prusa MK4 kit printer for the full price. After the printer kit is delivered to you, your Prusa account automatically applies the 5% discount. Make sure to be always logged into your Prusa account, to have the discount applied.
MK4 vs MK3S+ vs MINI+ Comparison
 Original Prusa MK4 |
 Original Prusa i3 MK3S+ |
 Original Prusa MINI+ |
|
|
Build volume |
250 x 210 x 220 mm | 9.84 x 8.3 x 8.6 in | 250 x 210 x 210 mm | 9.84 x 8.3 x 8.3 in | 180 x 180 x 180 mm | 7 x 7 x 7 in |
|
Max hotend/heatbed temp. |
300 °C / 120 °C (572 °F / 248 °F) |
300 °C / 120 °C (572 °F / 248 °F) |
280 °C / 100 °C (536 °F / 212 °F) |
| Mainboard | Custom 32-bit xBuddy electronics with STM32 |
Einsy RAMBo 8-bit board |
Custom 32-bit Buddy electronics with STM32 |
| Stepper Drivers | Trinamic 2130 | Trinamic 2130 | Trinamic 2209 |
| Stepper motors | Precise 0.9° X,Y stepper motors (prevents VFA) | Regular 1.8° X,Y stepper motors | Regular 1.8° X,Y stepper motors |
| MMU3 support |
Yes |
Yes |
No |
| Extruder electronics | Custom breakout board for connecting fans, thermistors and other parts. |
No |
No |
| Filament path |
Aluminum heatsink, all-metal hotend, no PTFE tube |
Aluminum heatsink, all-metal hotend |
Aluminum heatsink, all-metal hotend |
| Drive system | Nextruder Planetary Gear System, 10:1 gearbox ratio |
Direct drive |
Bowden system with 3:1 gearing |
| First layer calibration | Fully automatic (thanks to the Load Cell sensor) | Manual adjust Z | Manual adjust Z |
| Quick-Swap nozzle system |
Yes |
No |
No |
| LCD screen | 3.5″ graphic 65k color screen |
Monochromatic LCD |
2.8″ graphic 65k color screen |
| Bed calibration | Automatic, Mesh Bed Leveling (only on print area) |
Automatic, Mesh Bed Leveling |
Automatic, Mesh Bed Leveling |
| One-click Printing |
Yes |
No |
Yes |
| Status LEDs |
Yes |
No |
No |
| Input shaper |
Yes |
No |
No |
| Filament Sensor | Yes (built-in Hall sensor) |
Yes (IR) |
Optional upgrade |
| Loadcell sensor |
Yes |
No |
No |
| Advanced sensors | Filament sensor, Loadcell sensor, Power panic, 4 high-precision thermistors (genuine Semitec) + fan motors RPM monitoring |
3 thermistors + SuperPINDA, fan RPM sensors |
3 thermistors + SuperPINDA, fan RPM sensors |
|
Power panic |
Yes |
Yes |
No |
|
Ethernet connection |
Yes |
Via Raspberry Pi |
Yes |
|
Wi-Fi connection |
LAN, Optional ESP Wi-Fi module (delivered with the printer) |
Via Raspberry Pi |
Separate upgrade ESP Wi-Fi module |
| Prusa Link | Integrated |
Via Raspberry Pi |
Integrated |
| Print medium | USB drive / LAN / internet via Prusa Connect | SD card (LAN / internet via Raspberry Pi) | USB drive / LAN / internet via Prusa Connect |
|
Firmware update interface |
USB drive | USB port via PC | USB drive |
Nu există produse asociate acestui produs.
Nu există piese de schimb asociate acestui produs.
Dacă ai vreo întrebare legată de acest produs, te rugăm sa completezi formularul de mai jos și în cel mai scurt timp vei primi un răspuns avizat de la personalul nostru calificat.